Barient Winch Spare Parts
Here's some useful information about maintaining our old Barient
Winches
Several of of in Chicago have the same problem with our Barient
winches. The pawl pockets on gers of the Barient 27 (or 25) primaries,
and the Barient 21 secondaries tend to wear over time. Not terribly
surprising since the pawls are stainless, and the gears are bronze.
Until a couple of years ago, I've been able to buy replacements
from Barient. Since Lewmar bought Barient, they've not made any
of the gears, and the gears are no longer available.
There is a guy out on the west coast named Glen Jasmer who is able
to make Barient parts. The prices are a bit higher than Barient
used to be since he makes them in smaller quantities, but it sure
beats buying a new winch. The gears are made of stainless steel
rather then bronze, so it's less likely the same problem will occur.
Glen's phone number is 619-722-8277
New Source for Barient Parts
We like it to be known that we have purchased a large quantity of
the original Barient tooling and all the technical data covering the
entire period of the existence of Barient/Barlow. Also, our records
show that we have a near 100% success rate in solving problems with
Barient and Barlow winches.
All inquiries can be directed to:
THE AUSTRALIAN YACHT WINCH COMPANY
4-11 Stoddart Rd.
Prospect NSW 2149 Australia
Phone: 61 2 9688 1570
Fax: 61 2 9636 1676
e-mail: winches@ibm.net
A visit to our homepage on the net (http://www.webcom.com/winches)
will reveal greater detail about us.
BARIENT / BARLOW WINCHES - SPARE PARTS LIST
Ratchet Pawl & Spring (+ additional Spring) US$ 4.00
Black Bearing with S/S rollers (#01-011), 1 7/8" I/D US$12.00
Black Bearing with 'DELRIN' rollers (#01-021), 1 7/8" I/D US$11.00
Grey Bearing (#01-014), 1 1/8" I/D US$ 8.00
Gold Bearing (#01-012), 1" I/D US$ 7.00
Green Bearing (#01-013), 7/8" I/D US$ 5.00
* We will quote on all other components, i.e. gears, gear shafts,
plastic drum tops and self-tailing jaws, line lifters and drive sockets
etc., on request.
* Where possible, please quote: make and model number of winch, standard
or self-tailing configuration and date of manufacture.
* All components are manufactured to their original specifications.
* We reserve the right to re-specify aspects of the original design,
that in our opinion, do not meet acceptable standards.
* Payment by credit cards (Visa and Mastercard) are welcome.
* We will debit credit cards only on dispatch of goods.
* The most economical method of shipping the goods (UPS or Mail) will
be advised prior dispatch.
|
